RepairXpert Industrial Automation

HVAC Supply Air Temperature Alarm

GEN-AIR1

Plant HVAC system supply air temperature outside acceptable range for production area.

low general
hvac temperature air handling cooling heating

Probable Causes (ranked)

Fix Steps

  1. 1 Check AHU (Air Handling Unit) status — operating normally?
  2. 2 Verify chiller/boiler is running and supplying correct temperature medium
  3. 3 Check coil valve position — should modulate with demand
  4. 4 Test temperature sensor — compare to portable probe reading
  5. 5 Replace air filters if differential pressure indicates clogged
  6. 6 Check damper positions and actuator operation

Field Trick

If the supply air temp is wrong but everything 'looks' fine, check the mixing dampers. A stuck return air damper or outside air damper completely changes the supply temp.

Suggested Replacement Parts

Parts matched to fault category: Solenoid Valve

SMC SY3120 Solenoid Valve P/N: SY3120-5LZD-M5 5/2 way, 24VDC, M5 ports, direct piping, 0.15-0.7 MPa
Festo VUVG Solenoid Valve P/N: VUVG-LK14-M52-AT-G18-1R8L 5/2 way, 24VDC, G1/8 ports, spring return
Air Pressure Regulator + Filter Combo P/N: AW30-03BG SMC AW series, 3/8 NPT, 5-125 PSI, with gauge and bowl guard

Prices are estimates. Verify part numbers match your equipment before ordering.

Need a deeper diagnosis with photo analysis and AI-powered troubleshooting?

Run Full Diagnosis
All Fault Codes