What causes fault code 60001 (PLC Communication Fault â€” Network Timeout)?

Ethernet cable disconnected or damaged at either end. Network switch port failed or switch lost power. Remote I/O module crashed â€” needs power cycle to recover. IP address conflict on the industrial network â€” duplicate assignment. PLC network module firmware issue after recent update

How do I fix fault code 60001?

Check physical Ethernet connections at both ends â€” reseat RJ45 connectors. Verify network switch status â€” check power LED and port link/activity LEDs. Ping remote device from a laptop on the same network segment. Power cycle the remote I/O rack or faulted device. Check for IP address conflicts â€” review DHCP leases or static IP assignment table. If firmware was recently updated, verify compatibility between PLC and network module versions

PLC Communication Fault â€” Network Timeout

60001

PLC lost communication with a remote I/O rack, HMI, or networked device. Affected stations show comm fault.

high general conveyor piler asrs packaging palletizer

plc communication network ethernet timeout

Probable Causes (ranked)

Ethernet cable disconnected or damaged at either end
Network switch port failed or switch lost power
Remote I/O module crashed â€” needs power cycle to recover
IP address conflict on the industrial network â€” duplicate assignment
PLC network module firmware issue after recent update

Fix Steps

1 Check physical Ethernet connections at both ends â€” reseat RJ45 connectors
2 Verify network switch status â€” check power LED and port link/activity LEDs
3 Ping remote device from a laptop on the same network segment
4 Power cycle the remote I/O rack or faulted device
5 Check for IP address conflicts â€” review DHCP leases or static IP assignment table
6 If firmware was recently updated, verify compatibility between PLC and network module versions

Suggested Replacement Parts

Parts matched to fault category: Network Module

Allen-Bradley 1756-EN2T EtherNet/IP Module P/N: 1756-EN2T ControlLogix EtherNet/IP module, dual port, DLR capable

Amazon $850.00 Grainger $1050.00

Siemens CM 1542-1 PROFINET Module P/N: 6GK7542-1AX00-0XE0 S7-1500 PROFINET IO controller, 2-port switch

Amazon $650.00 Mouser $720.00

Managed Industrial Ethernet Switch 8-Port P/N: SE2-SW5U 8-port managed switch, DIN rail, 10/100 Mbps, IGMP snooping

AutomationDirect $145.00 Amazon $120.00 Mouser $155.00

Prices are estimates. Verify part numbers match your equipment before ordering.

Need a deeper diagnosis with photo analysis and AI-powered troubleshooting?

Run Full Diagnosis